Ramona Music Center Guitar Pedal Workshop.

Sat, August 6, 10am – 3pm

Registration has now closed for this workshop. Check back again for additional workshops, or CONTACT US.

Build a Custom Overdrive Pedal, and make it sound like you want!

During this workshop, you will build your own AUSTINDRIVE guitar pedal using hand tools, soldering irons, and electrical tools. Following the AUSTINDRIVE Tutorial and videos (below), YOU will solder components to a printed circuit board, then audition and install the components that will define your own overdrive sound. If you don’t like it… change it! You are in charge of the sound. Drive and tone can range from smooth blues, to 60’s Fuzz, to metal. It truly is “building” and “designing” a custom guitar pedal that you will be proud to use for years.

Click here to download the illustrated AustinDrive plans.

We will have instructors at the workshop to help new inventors,
But if you’ve never soldered before, take a look at this awesome Soldering Comic Book!

Before August 6, watch the full assembly playlist on YouTube:

Notes:

• There is limited time at the workshop, so it is required that you download and view the plans and videos beforehand, so you know what to expect and your build goes as smoothly as possible.
• A liability waiver signed by a parent/guardian is required for minors.

If you have any questions about the workshop, please contact Ramona Music Center, or write to Rick at Austin Ribbon Microphones: DiyRibbonMic@yahoo.com

– Rick Wilkinson
www.AustinMics.com